Ürün Kategorileri

Duyurular ve
Yeni Ürünler

1) Tayvan’ın ilk vidalı mil üreticisi TBI MOTION Comtop marka ürünler,
2) İtalyan GFM marka helis, düz, sertleştirilmiş, taşlanmış kramayerler,
3) Tozlu ortamlarda sorunsuz çalışan Makaralı Rulmanlar,
4) Sıkma Somunları (Locknut)
Rekabetçi fiyatlar ve stoktan anından teslim avantajlarıyla POLYMAK stoklarında!

-Devamı ⇒

> ÜRÜNLER > Dolum ve Test Konnektörleri > Çabuk Bağlantı Elemanları > TW17H for testing of components with internal thread

TW17H for testing of components with internal thread

WEH® Connector TW17H for testing of components with internal thread, lever actuation, vacuum up to max. 350 bar

The WEH® TW17H Quick Connector is designed for sealing standardized internal thread applications. The higher the test pressure, the tighter the WEH® Connector will clamp itself into the thread of the test piece and provides a pressure-tight connection in seconds. The front o-ring reliably seals the connection and no additional clamping devices are required. Time-consuming and expensive testing devices are eliminated. As a standard the clamping jaws of the WEH® connector type TW17H (sizes 5 - 8) have additional bores, increasing the flow rate of the medium by 1/3.
For the sizes 1 - 4, the modified clamping jaws are optionally available. Please contact us!

The TW17H Quick Connector is manually actuated via hand lever. The connector is also available as TW17V with pneumatic actuation via valve head and as TW17P with pneumatic actuation for external manual, semi or fully automatic control systems.

Special versions, e.g. connectors in longer or shorter versions, as a plug or with hydraulic actuation etc. are possible.